Stake Out Pole Build

yuleecoolie · **Joined:** Tue Jul 10, 2012 3:29 pm **Posts:** 59

Here's my idea for a SOP:

I used the follwing materials:
(1)- 4' X 1 1/4" OD fiberglass pole,
(1)-4' X 1" OD fiberglass pole,
(1)- 4' X 3/4" OD fiberglass pole
(3)- 3/4" Quick Release Push Buttons (plastic)
(1)- 1 1/4" PVC end cap

Step 1. Cut poles as described above.

Attachment:

1 (2).JPG [ 47.93 KiB | Viewed 385 times ]

Step 2. Drill Holes for the Quick Release Buttons approx 1" from pole end.

Attachment:

1.JPG [ 43.53 KiB | Viewed 385 times ]

Step 3. Insert Quick Release Buttons into poles.

Step 4. Place Smaller poles into the larger ones.

Attachment:

4.JPG [ 36.08 KiB | Viewed 385 times ]

Step 5. Place PVC end cap over end of 1 1/4" pole

Assembled the pole should extend to about 11 feet.

Attachment:

5.JPG [ 35.63 KiB | Viewed 385 times ]

Stored the Pole is about 4 feet. Enjoy!

Attachment:

7.JPG [ 37.5 KiB | Viewed 385 times ]

Johnnie

xxstephensxx · **Posted:** Thu Jul 12, 2012 10:54 am

Nice... Will the SOP fit in your scupper hole? Or are you just going to tie off on it?

yuleecoolie · **Joined:** Tue Jul 10, 2012 3:29 pm **Posts:** 59

Sure, you can tie it off, put it in scupper, put it on trolley, etc...

Johnnie

islandspeed2001 · **Posted:** Thu Jul 12, 2012 11:50 am

Actually, that would make a great push pole. Do the varied size pipes fit snug? What kind of point are you going to put on it. Those oyster bars can get pretty tough and fiberglass will shatter if your jamming it down on something.

CJ_Tiz · **Posted:** Thu Jul 12, 2012 12:20 pm

Where can you pick up fiberglass like that?

Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

Stake Out Pole Build

Who is online